跳至主要内容

100G QSFP28 2X50G Breakout Dac cable Sinovo Telecom

100% same as Mellanox  2x50G  the first one factory in China
which mass production for  QSFP28 100G to 2x50G breakout


Sinovo Telecom mass production for  100G QSFP28 AOC Cables

Till now our 100G QSFP28 2*50G AOC Cables and 100G QSFP28 to QSFP28 AOC cables offer precision external cable assembly solutions. They meet the everyday increasing demand for higher channel density with high-level signal integrity in high performance computing, top-of-rack switching, and network storage deployments.

All of our DAC cables are individually tested, met and exceeded industry standards to ensure high performance, cost-effective, quality assemblies for today’s direct attach equipment connections.

Our DAC cables extremely low-insertion loss due to the unique skinfoam skin, gas-injected dielectric technology as well as extreme control of balanced/unbalanced (Mode conversion). The technology offers ease of cable management and smaller packaging densities. The cable assemblies employ new, innovative PCB technology designed specifically to deliver signal integrity performance. The cables regulate cross talk and launch conditions between wire and PCB termination to optimize return loss and prevent or minimize “ringing” effects.


Parameters:

   Data rate up to 100 Gbps
   360° shielding for superior EMI/EMC performance
   Proprietary high-speed PCB termination technology to minimize impedance discontinuity and cross talk
   Patented back shell and positive latching mechanism for easy engagement and disengagement
   Overmolded cable termination for increased mechanical robustness
   Dust covers included for all plugs
   Fully compliant with all relevant SFF and IEEE specifications
   Individual cable test report available upon request
   Lengths available from 0.5M up to 4M
Custom options include EEPROM content, breakout, crossover, length, and LSZH

Products Series:

Direct Attach Copper Cables
100Gb/s  QSFP28 to QSFP28 DAC  1-10m
100Gb/s QSFP28 to 4*25G  Dac   1-10m
40Gb/s  QSFP+ DAC              1-10m
40Gb/s  QSFP+ to 4*10G SFP+ DAC 1-10m
40Gb/s QSFP+ 8*LC Dac Cable    1-10m
10Gb/s SFP+ Passive Cable      1-10m



Customer Range:

Currently our customers are Cisco,Arista,Huawei,Dell,FCI,Amazon,Facebook.



Choose Sinovo,Choose Success.

评论

此博客中的热门博文

25G/100G-PON 进展和演进趋势分析

“宽带中国”战略首次在国家层面将宽带网络定位为“新时期我国经济社会发展的战略性公共基础设施”,宽带 接入 网具有投资大,建设周期长,网络复杂的突出特点,是宽带网络的主要组成部分。随着 云计算 、高清视频、虚拟现实等新业务的迅猛发展,用户带宽以每5-6年10倍速度增长,现有接入网 技术 需要不断进行升级以适应更高的带宽和技术要求。基于点到多点拓扑的PON网络是主流宽带接入技术,PON网络技术已经经历了从EPON和GPON到10G PON的发展历程。当前全球宽带接入市场逐步进入千兆时代,未来10G入户将成为宽带接入建设的必然趋势。随着4K视频和5G技术的加速发展,10G-PON技术也难以满足未来的驻地接入和移动前传和回传的带宽需求,支持25G/100G更高速率的PON技术正逐步成为业界研究热点。 1 下一代PON标准进展 10G-PON之后PON技术的演进主要有2种方式,一种是单波长速率提升,波特率由10G提升到25G/40G等;另一种是采用多波长叠加方式,每波长 承载 的速率是10G/25G,多波长叠加到40G/80G/100G。 FSAN 组织在2011 年启动NGPON2 的标准研发,2015年完成标准制定。FSAN 组织选择了TWDM-PON 作为主要技术方案,采用4/8波长叠加方式,每波长采用10G TDM方式,在移动回传和商业客户中可选择点对点的WDM overlay 技术。NGPON2 的关键需求主要为40G 下行和40G/10G 上行, 实现20km 传输距离和1:64 分光。ITU标准组织也在关注单波25G的研究进展,预计近期将启动25G-PON的标准制定。 2013年IEEE开始启动NG-EPON研究,成立了IEEE ICCOM对NG-EPON的市场需求、技术方案进行分析,2015年3月发布了NG-EPON技术白皮书。2015年7月开始启动100G-EPON标准制定,命名为IEEE 802.3ca ,预计在2018年发布100G-EPON标准。100G-EPON目标定义了3种MAC层速率25G,50G和100G。其中25G分为非对称 10G/25G和对称25G/25G二种制式。 2 25G/100G-PON调制技术分析 由于接入网技术升级快,规模巨大,投入高,高性能和低成本一直是决定接入网技术演进的关键因素。其中光器...

40G QSFP+ SR4 LR4 ER Sinovo Telecom

40G QSFP + SR4 IEEE 802.3bm, 802.3ba, SFF-8436 4 voies optiques indépendantes Vitesse de ligne de 10,3 Gb / s, 14,1 Gb / s Interface QSFP + MPO Jusqu'à 300 m de distance 40G QSFP + LR4 IEEE 802.3bm, 802.3ba, SFF-8436 4 voies optiques indépendantes Emetteur: 4 x CWDM non refroidi DFB LD (1271 1291 1311 1331nm) Interface QSFP + Duplex LC Jusqu'à 10 km de distance 40G QSFP + ER4 IEEE 802.3bm, 802.3ba, SFF-8436 4 voies optiques indépendantes Interface QSFP + Duplex LC Jusqu'à 40 km de distance

100G QSFP28 DAC (cable de conexión directa) Y AOC (cable óptico activo) Sinovo

100G QSFP28 AOC (cable óptico activo) 100G QSFP28 a 100G QSFP28 AOC 100G QSFP28 a 2 x QSFP + (50G) AOC 100G QSFP28 a 4 x SFP28 (25G) AOC Interconectividad de alta densidad de 100Gb / s. Bajo peso para arquitecturas de alto conteo de puertos Radio de curvatura pequeño para una fácil instalación y manejo de fibra. Excelente integridad de señal Hasta 100M para Infiniband EDR, 4 x 25 y 100G Ethernet. 100G QSFP28 DAC (cable de conexión directa) 100G QSFP28 a 100G QSFP28 DAC 100G QSFP28 a 2 x QSFP + (50G) DAC 100G QSFP28 a 4 x SFP28 (25G) DAC Cables divisores de cobre pasivos Protección de 360 ​​° para un rendimiento EMI / EMC superior Totalmente compatible con todas las especificaciones relevantes de SFF y IEEE Longitudes disponibles desde 0.5M hasta 10M