SINOVO
10Gbps OEO Series are XFP-XFP or SFP+ to
SFP+ Optical-Electrical-Optical type media converter / repeater for connection
between fiber to fiber 10Gbps equipment function as fiber mode converter, or as
fiber repeater for long distance transmission.
It's main applications are such as connection between fiber to fiber or fiber
to copper 10Gbps equipment function as fiber mode converter, or as fiber
repeater for long distance transmission or OEO for network backbone(SAN, LAN,
MAN).
It support SDH/SONET STM-64/OC-192, 10G fiber channel, 10G Ethernet etc and can be applied in Telecommunication room, R&D laboratory, Data center or even 980nm/1310nm /1550nm/CWDM/DWDM Optical Wavelength Conversion.
It support SDH/SONET STM-64/OC-192, 10G fiber channel, 10G Ethernet etc and can be applied in Telecommunication room, R&D laboratory, Data center or even 980nm/1310nm /1550nm/CWDM/DWDM Optical Wavelength Conversion.
Features
|
l 3R
Repeater
|
l Support
Jumbo Frame
|
|
l Transparent
Transport and very low delay
|
l Support
ITUT prescribed DWDM/CWDM wavelength
|
|
l Support
DMI function for SFP+/XFP fiber module
|
l Support
PRBS31 Pattern Generator and Checker function
|
|
l Support
Loopback test function
|
l Economic
In-band Management function
|
|
l Powerful
Network Management function (Web, SNMP, Console) -used with AN-CH10 chassis
|
l Support
hot plugging
|
|
l Support
1U Rack (4 slots)、3U
Rack (16 slots) and standalone use
|
l Full
State Led display
|
|
l Easy
installation
|
|
Specifications
|
l Performance
Data: Technical Indexes
|
l Equipment
function: 3R Repeater / Extender / Media converter
|
|
l Transmission
Speed: 10Gb/s
|
l Protocols:
IEEE802.3ae (10Gbase-R/LRM)
|
|
l Access
Type: 10G LAN/ 10G WAN
|
|
|
Interface
Type:
|
|
|
l A
Type: SFP+ To/From SFP+
|
l B
Type: XFP To/From XFP
|
|
Transmission
Distance:
|
|
|
l SFP+
module/ XFP module: it depends on the transmission distance of the module
|
|
|
l Maximum
Packet Forwarding Rate: 14,880,950/S
|
|
|
Network
management information: Card type information
|
|
|
l SFP+
or XFP fiber module detection
|
l SFP+
or XFP fiber module DMI function
|
|
l Link
status detector
|
l Enable/Disabled
Loopback test function
|
|
l Card
type information
|
l Remote
card's status monitor (only in pairs)
|
|
Power
requirement:
|
|
|
l Rack-mountable:
AC 220V/ DC -48V
|
l Standalone:
AC 220V OR -48V
|
|
l Power
consumption: ≤5W
|
l
|
|
Work
Environment:
|
|
|
l Operating
Temp: 0~ 50 ℃
|
l Storage
Temp: -10~ 70 ℃
|
|
l Humidity:
5%~90% (non-condensing)
|
|
|
Dimension:
|
|
|
l Card:
150mm (W) ×
90mm (D)
|
|
评论
发表评论