跳至主要内容

E1G42EF-SFP (82576EB) PCI-E dual-port Gigabit Ethernet Sinovo

    INTEL ETHERNET SERVER ADAPTER E1G42EF-SFP

    PRODUCT CODE:   E1G42EF-SFP

    Introduction
    The Intel® 82576 Gigabit Ethernet Controller is a single, compact, low power component that offers two fully-integrated Gigabit Ethernet media access control (MAC) and physical layer (PHY) ports. This device uses the PCIe* v2.0 (2.5GT/s). The Intel® 82576EB Gigabit Ethernet Controller enables two-port implementation in a relatively small area and can be used for server system configurations such as rack mounted or pedestal servers, where the Intel® 82576EB Gigabit Ethernet Controller can be used as add-on network interface card (NIC) or local area network on motherboard (LOM) design. Another system configuration is blade servers, where it can be used as LOM. The Intel® 82576EB Gigabit Ethernet Controller can also be used in embedded applications such as switch add-on cards and network appliances.

    Specifications
    General
    Connectors  :                   LC Fiber Optic (Fiber)
    IEEE standard/network topology :   1000BASE-T
    Cabling Fiber                    MMF 62.5/50 um

    Technical
    Data rate supported per port:    1000 Mbps (Fiber)
    Bus type :                    PCI Express* 2.0 (2.5 GT/s)
    Bus width :                   4-lane PCI Express; operable in x4, x8 and x16 slots
    Interrupt levels :               INTA, INTB, INTC, INTD, MSI, MSI-X
    Controller-processor:           Intel Ethernet Controller 82576
    Power consumption (typical) :    82576  2.8 W
    Operating temperature :        0℃to 55℃ (32℉to 131℉)
    Storage temperature :          -40℃to 70℃ (-40℉ to 158℉)
    Storage humidity :             90% non-condensing relative humidity at 35 ¡ãC
    Connect Speed LED Indicators :   amber=1 Gb/s

    Advanced Technologies
    Intel® Virtualization Technology for Connectivity   VMDc(SR-IOV with mobility),
    VMDq, Intel® I/OAT
    MACsec IEEE 802.1 AE     Yes
    IEEE 1588    Yes

    Physical Dimensions
    Length:                      13.54 cm (5.33 in.)
    Width:                       6.89 cm (2.71 in.)
    Full-height end bracket:         12.0 cm (4.725 in.)
    Low-profile end bracket :        7.92 cm (3.117 in.)

    Supported Operating Systems:
    Windows Server 2012 R2*, Windows Server 2012*, Windows 8*, Windows Server 2008 R2*, Windows 7*, Windows Server 2008*, Windows Vista*, Windows Server 2003 R2*, Windows Server 2003*, Windows XP Professional, Linux* Stable Kernel version 3.x, 2.6,x, Red Hat Enterprise Linux* 5, 6, SUSE Linux Enterprise Server* 10, 11, FreeBSD 9*, , VMware ESX/ESXi*
在线客服

评论

此博客中的热门博文

25G/100G-PON 进展和演进趋势分析

“宽带中国”战略首次在国家层面将宽带网络定位为“新时期我国经济社会发展的战略性公共基础设施”,宽带 接入 网具有投资大,建设周期长,网络复杂的突出特点,是宽带网络的主要组成部分。随着 云计算 、高清视频、虚拟现实等新业务的迅猛发展,用户带宽以每5-6年10倍速度增长,现有接入网 技术 需要不断进行升级以适应更高的带宽和技术要求。基于点到多点拓扑的PON网络是主流宽带接入技术,PON网络技术已经经历了从EPON和GPON到10G PON的发展历程。当前全球宽带接入市场逐步进入千兆时代,未来10G入户将成为宽带接入建设的必然趋势。随着4K视频和5G技术的加速发展,10G-PON技术也难以满足未来的驻地接入和移动前传和回传的带宽需求,支持25G/100G更高速率的PON技术正逐步成为业界研究热点。 1 下一代PON标准进展 10G-PON之后PON技术的演进主要有2种方式,一种是单波长速率提升,波特率由10G提升到25G/40G等;另一种是采用多波长叠加方式,每波长 承载 的速率是10G/25G,多波长叠加到40G/80G/100G。 FSAN 组织在2011 年启动NGPON2 的标准研发,2015年完成标准制定。FSAN 组织选择了TWDM-PON 作为主要技术方案,采用4/8波长叠加方式,每波长采用10G TDM方式,在移动回传和商业客户中可选择点对点的WDM overlay 技术。NGPON2 的关键需求主要为40G 下行和40G/10G 上行, 实现20km 传输距离和1:64 分光。ITU标准组织也在关注单波25G的研究进展,预计近期将启动25G-PON的标准制定。 2013年IEEE开始启动NG-EPON研究,成立了IEEE ICCOM对NG-EPON的市场需求、技术方案进行分析,2015年3月发布了NG-EPON技术白皮书。2015年7月开始启动100G-EPON标准制定,命名为IEEE 802.3ca ,预计在2018年发布100G-EPON标准。100G-EPON目标定义了3种MAC层速率25G,50G和100G。其中25G分为非对称 10G/25G和对称25G/25G二种制式。 2 25G/100G-PON调制技术分析 由于接入网技术升级快,规模巨大,投入高,高性能和低成本一直是决定接入网技术演进的关键因素。其中光器...

40G QSFP+ SR4 LR4 ER Sinovo Telecom

40G QSFP + SR4 IEEE 802.3bm, 802.3ba, SFF-8436 4 voies optiques indépendantes Vitesse de ligne de 10,3 Gb / s, 14,1 Gb / s Interface QSFP + MPO Jusqu'à 300 m de distance 40G QSFP + LR4 IEEE 802.3bm, 802.3ba, SFF-8436 4 voies optiques indépendantes Emetteur: 4 x CWDM non refroidi DFB LD (1271 1291 1311 1331nm) Interface QSFP + Duplex LC Jusqu'à 10 km de distance 40G QSFP + ER4 IEEE 802.3bm, 802.3ba, SFF-8436 4 voies optiques indépendantes Interface QSFP + Duplex LC Jusqu'à 40 km de distance

100G QSFP28 DAC (cable de conexión directa) Y AOC (cable óptico activo) Sinovo

100G QSFP28 AOC (cable óptico activo) 100G QSFP28 a 100G QSFP28 AOC 100G QSFP28 a 2 x QSFP + (50G) AOC 100G QSFP28 a 4 x SFP28 (25G) AOC Interconectividad de alta densidad de 100Gb / s. Bajo peso para arquitecturas de alto conteo de puertos Radio de curvatura pequeño para una fácil instalación y manejo de fibra. Excelente integridad de señal Hasta 100M para Infiniband EDR, 4 x 25 y 100G Ethernet. 100G QSFP28 DAC (cable de conexión directa) 100G QSFP28 a 100G QSFP28 DAC 100G QSFP28 a 2 x QSFP + (50G) DAC 100G QSFP28 a 4 x SFP28 (25G) DAC Cables divisores de cobre pasivos Protección de 360 ​​° para un rendimiento EMI / EMC superior Totalmente compatible con todas las especificaciones relevantes de SFF y IEEE Longitudes disponibles desde 0.5M hasta 10M