Intel E10G42BFSR (X520-SR2) PCI-E 10 Gigabit Ethernet Card Server Adapter Sinovo

PRODUCT CODE: E10G42BFSR  X520-SR2



Key Features
l 82599 10 Gigabit Ethernet Controller : Industry-leading, energy-efficient design for next-generation 10 Gigabit performance Intel and multi-core processors
l SFP+ Connectivity: X520 Adapters with SFP+ connections support 10GBASE-SR, 10GBASE-LR and SFP+ Copper Direct  Attach physical media.
l Low-profile : Enables higher bandwidth and throughput from standard and low-profile PCIe slots and servers
l Load balancing on multiple CPUs : Increases performance on multi-processor systems by efficiently balancing network loads across CPU cores when used with Receive-Side Scaling (RSS) from Microsoft or Scalable I/O on Linux*
l iSCSI remote boot support:Provides centralized storage area network (SAN) management at a lower cost than other iSCSI solutions 
l : Includes FCoE Boot and Data Center Bridging
l Support for most network operating systems (NOS): Enables widespread deployment
l Intel PROSet Utility for Windows* Device Manager: Provides point-and-click management of individual adapters, advanced adapter features, connection  teaming, and virtual local area network (VLAN) configuration 
l Time Sync (IEEE 1588*, 802.1as):Enables networked Ethernet equipment to synchronize internal clocks according to a network master clock; endpoint can then acquire an accurate estimate of the master time by compensating for link latency
Specifications
General
Connectors  :                   One or two LC fiber-optic connectors 
SFP+ Direct Attach cables (E10G42BTDA)
Network Standards   :           IEEE 802.3:
Physical Layer Interface           10GBASE-SR (E10G41BFSR, E10G42BFSR) 
10GBASE-LR (E10G41BFLR)
SFF-8431: 
10GSFP+Cu (a.k.a. Direct Attach) 
(E10G42BTDA)
Technical
Data rate supported per port:    Optical: 1 GbE/10 GbE
Direct Attach: 10 GbE
Bus type :                    PCI Express* 2.0 (5 GT/s) 
Bus width :                   4-lane PCI Express; operable in x4, x8 and x16 slots 
Interrupt levels :               INTA, MSI, MSI-X
Controller-processor:           Intel 82599 Ethernet Controller 
Power consumption  : 
SKU                                 Maximum Power        Typical Powe
Dual-port 10GBASE-SR/1000BASE-SX     6.8 W                  6.5 W 
Dual-port 10GBASE-LR/1000BASE-LX      7.0 W                 6.6 W 
Dual-port direct attached twinax          6.2 W                 5.8 W 
Single-port 10GBASE-SR/1000BASE-SX    4.8 W                 4.5 W 
Single-port 10GBASE-LR/1000BASE-LX    4.8 W                 4.5 W 
Single-port direct attached twinax        4.6 W                  4.3 W
Operating temperature :        0℃to 55℃ (32℉to 131℉) 
Storage temperature :          -40℃to 70℃ (-40℉ to 158℉) 
Storage humidity :             90% non-condensing relative humidity at 35 ¡ãC 
Connect Speed LED Indicators :   LINK (solid) and ACTIVITY (blinking) 
LINK SPEED (green=10 Gbps; yellow=1 Gbps) 
Advanced Technologies 
Intel® Ethernet Power Management  Yes 
Intel® Data Direct I/O Technology        Yes
Intelligent Offloads                Yes 
Storage Over Ethernet              iSCSI , FCoE , NFS 
Intel® Virtualization Technology for Connectivity 
On-chip QoS and Traffic Management      Yes 
Flexible Port Partitioning                 Yes 
Virtual Machine Device Queues (VMDq)     Yes 
PCI-SIG* SR-IOV Capable                 Yes
Physical Dimensions
Length:                      13.54 cm (5.33 in.)
Width:                       6.89 cm (2.71 in.)
Full-height end bracket:         12.0 cm (4.725 in.)
Low-profile end bracket :        7.92 cm (3.117 in.)
Supported Operating Systems:
Windows Server 2012 R2*, Windows Server 2012*, Windows 8*, Windows Server 2008 R2*, Windows 7*, Windows Server 2008* SP2, Windows Vista* SP2, Windows Server 2003 R2*, Windows Server 2003* SP2, Linux* Stable Kernel version 3.x, 2.6,x, Red Hat Enterprise Linux* 5, 6, SUSE Linux Enterprise Server* 10, 11, FreeBSD 9*, VMware ESX/ESXi*